Century Instrument Company
Century Instrument Company
Address: 11865 Mayfield,
Livonia, MI 48150
Phone: 734.427.0340
Fax: 734.427.5950
Email: info@centuryinstrument.com
Website: www.centuryinstrument.com
Print Back
Wide Selection — available in a wide variety of body materials, linings and end connections. By utilizing such highly resistant linings as Saran, Polypropylene, Kynar, Tefzel, Glass, Rubber, etc., virtually any chemical service within the pressure/temperature limits of the valve can be handled safely and economically.

No Stem Leakage — since the diaphragm isolates the fluid stream there is no need for a packing gland — no atmospheric contamination, no leakage or waste, no expensive maintenance of stem, seats or stuffing box.

Bubble-Tight Shut Off — results when the downward thrust of the stem and compressor assembly molds the flexible diaphragm against the weir. The diaphragm will accommodate itself to rust, scale, slurry, or fibrous material.

Streamline Flow — with minimum pressure drop because of the absence of grooves, pockets or sharp changes in direction of flow.

Cost Saving — simple in-line maintenance. In less time than it takes to remove and replace a conventional valve, a new body diaphragm can be installed. Thus providing essentially a brand new valve at a tiny faction of the cost of a new or repaired conventional valve — all without removing the valve body from the line.

Flow Control — the automated diaphragm valve provides an excellent means of handling the changing flow requirements in most process installations. By the addition of a positioner to the actuator, even more precise control can be achieved, especially in the handling of slurries, or viscous and fibrous materials.

Body Materials — available in cast iron, ductile iron, carbon steel, stainless steel, Alloy-20, aluminum and bronze
Unit of Measure

Specifications

Body Material

 N/A Cast Iron

Temperature Range

 N/A -30 to 300 ºF

Typical Applications

 N/A Excellent chemical and abrasive resistance at elevated temperatures

Lining Options

 N/A Hard Rubber

Material/Lining Classification

 N/A Metal Rubber

End Connection

 N/A
(1) Flanged Lined Ends

End to End Dimension A

 N/A 7 3/4 in

Valve Size [Fraction]

 N/A 2 in

Valve Size [Decimal]

 N/A 2.00 in50.80 mm

Diaphragm Control Valve Options

 N/A 730-RV, Pilot Operated Controller Option
Line Pressure Conditions1 N/A 0% P.D 100% P.D.

Services

 N/A Ammonium Phosphate Bleached Pulps (8%) Boric Acid Brine (Alkaline) Cad. Plating Sol. Calcium Hypoclorite Calcium Sulfite Carbonic Acid Deionized Water Diatomaceous Earth Ferric Chloride Ferric Nitrate Formaldehyde - 40% Formic Acid - 85% Ion Exchange Paper Pulp - Chlorin. Phosphoric Acid Plating Solutions All except Chrome Potassium Carbonate Potassium Hydroxide Salt Brine Sea Water Sewage Sodium Acetate Sodium Chloride Sodium Hydroxide Sodium Hypochloride Sodium Peroxide Sodium Sulfate Sulfur Dioxide Solution Sulfur Dioxide Wet Gas Sulfuric Acid - to 50% Water - Acid Water - Alkaline Water - Deionized Water - Sea White Liquor Zinc Chloride Zinc Sulfate

Weight

 N/A 24 lb

Diaphragm Selection

Diaphragm Material

 N/A Ethylene Propylene EPDM

Diaphragm Material Description

 N/A Elastomeric - built like a tire - especially compounded materials - ruggedly reinforced with fabric plies and designed to take a great deal of physical abuse. The sealing bead provides a greater sealing ability by localizing closing forces for bubble-tight shut-off.

Standard Actuator Features

Actuator Size Number

 N/A 0, Actuator Size "0"
1, Actuator Size "1"
2, Actuator Size "2"
2A, Actuator Size "2A"
3, Actuator Size "3"
4, Actuator Size "4"
5, Actuator Size "5"
Action of Actuator2 N/A
(TYPE C) Air to Open - Air to Close

(TYPE H) Spring to Open - Air to Close

(TYPE HRT) Spring to Close - Air to Open
  • 1 100% P.D. means that downstream pressure falls to 0 psig.

    0% P.D. means that downstream pressure remains at, or returns to essentially the same as the upstream pressure.
  • 2 The choice of actuator size is determined by the line pressure through the value and the available operating air pressure. Some operating conditions call for substantial line pressure downstream when the valve closes.

    After the valve closes, if the downstream pressure is less that 30 % of the upstream pressure - this condition is 100% Δ P. If the downstream pressure is 30% or more of the upstream pressure - the condition is 0% Δ P.