Item # 1"/14-1-H/A, Flanged End Automated Cast Iron Diaphragm Valves (Kynar Lining) On Century Instrument Co.

ProductsAutomatic Diaphragm Valves Manual Diaphragm Valves Spare Parts for Diaphragm Valves Diaphragm Relief Valves Diaphragm Control Valves

Process Control Valves and Instrumentation Products > Automated Diaphragm Valves > Metal Plastic Lined Diaphragm Valves > Kynar Lining > Flanged End Automated Cast Iron Diaphragm Valves (Kynar Lining) > Item # 1"/14-1-H/A


	Item # 1"/14-1-H/A, Flanged End Automated Cast Iron Diaphragm Valves (Kynar Lining)

larger image

Wide Selection — available in a wide variety of body materials, linings and end connections. By utilizing such highly resistant linings as Saran, Polypropylene, Kynar, Tefzel, Glass, Rubber, etc., virtually any chemical service within the pressure/temperature limits of the valve can be handled safely and economically.

No Stem Leakage — since the diaphragm isolates the fluid stream there is no need for a packing gland — no atmospheric contamination, no leakage or waste, no expensive maintenance of stem, seats or stuffing box.

Bubble-Tight Shut Off — results when the downward thrust of the stem and compressor assembly molds the flexible diaphragm against the weir. The diaphragm will accommodate itself to rust, scale, slurry, or fibrous material.

Streamline Flow — with minimum pressure drop because of the absence of grooves, pockets or sharp changes in direction of flow.

Cost Saving — simple in-line maintenance. In less time than it takes to remove and replace a conventional valve, a new body diaphragm can be installed. Thus providing essentially a brand new valve at a tiny faction of the cost of a new or repaired conventional valve — all without removing the valve body from the line.

Flow Control — the automated diaphragm valve provides an excellent means of handling the changing flow requirements in most process installations. By the addition of a positioner to the actuator, even more precise control can be achieved, especially in the handling of slurries, or viscous and fibrous materials.

Body Materials — available in cast iron, ductile iron, carbon steel, stainless steel, Alloy-20, aluminum and bronze

Specifications · Diaphragm Selection · Standard Actuator Features

Specifications

Body Material

Cast Iron

Temperature Range

-30 to 250 ºF

Typical Applications

Acids, Caustics and Oil

Lining Options

Kynar

Material/Lining Classification

Metal Plastic

End Connection

(1) Flanged Lined Ends
larger image

End to End Dimension A

5 3/4 in

Valve Size [Fraction]

1 in

Valve Size [Decimal]

1.00 in
25.40 mm

Diaphragm Control Valve Options

730-RV, Pilot Operated Controller Option

Line Pressure Conditions¹

0% P.D
100% P.D.

Services

Acetaldehyde
Aluminum Nitrate
Aluminum Sulfate
Brine (Chlorinated)
Calcium Sulfite
Chlorine Gas, Wet
Chlorine Solutions
Copper Chloride
Copper Plating
Ethylene Glycol
Ferric Chloride
Ferric Nitrate
Formaldehyde - 40%
Formic Acid - 85%
Green Liquor
Hydrochloric Acid
Hydrofluoric Acid
Hydrogen Peroxide (30%)
Muriatic Acid
Paper Pulp - Chlorin.
Phosphoric Acid
Picric Acid
Polyvinyl Chloride
Propylene Glycol
Sulfuric Acid 50 to 79%

Weight

11 lb

¹ 100% P.D. means that downstream pressure falls to 0 psig.

0% P.D. means that downstream pressure remains at, or returns to essentially the same as the upstream pressure.

Diaphragm Selection

Diaphragm Material		Hypalon

Diaphragm Material Description		Elastomeric - built like a tire - especially compounded materials - ruggedly reinforced with fabric plies and designed to take a great deal of physical abuse. The sealing bead provides a greater sealing ability by localizing closing forces for bubble-tight shut-off.

Standard Actuator Features

Actuator Size Number

0, Actuator Size "0"
1, Actuator Size "1"
2, Actuator Size "2"
2A, Actuator Size "2A"
3, Actuator Size "3"
4, Actuator Size "4"
5, Actuator Size "5"

Action of Actuator¹

(TYPE C) Air to Open - Air to Close
larger image

(TYPE H) Spring to Open - Air to Close
larger image

(TYPE HRT) Spring to Close - Air to Open
larger image

¹ The choice of actuator size is determined by the line pressure through the value and the available operating air pressure. Some operating conditions call for substantial line pressure downstream when the valve closes.

After the valve closes, if the downstream pressure is less that 30 % of the upstream pressure - this condition is 100% Δ P. If the downstream pressure is 30% or more of the upstream pressure - the condition is 0% Δ P.

MORE IMAGES


	· Rubber

Item # 1"/14-1-H/A, Flanged End Automated Cast Iron Diaphragm Valves (Kynar Lining)